Home> Products> Heat Shrinkable Pipe Coating> Heat Shrinkable Sleeve> PE Film Heat Shinkable Sleeve For Steel Pipe
PE Film Heat Shinkable Sleeve For Steel Pipe
PE Film Heat Shinkable Sleeve For Steel Pipe
PE Film Heat Shinkable Sleeve For Steel Pipe
PE Film Heat Shinkable Sleeve For Steel Pipe
PE Film Heat Shinkable Sleeve For Steel Pipe
PE Film Heat Shinkable Sleeve For Steel Pipe
PE Film Heat Shinkable Sleeve For Steel Pipe

PE Film Heat Shinkable Sleeve For Steel Pipe

$9≥1Square Meter

Payment Type:L/C,T/T,Western Union
Incoterm:FOB,CFR,CIF
Min. Order:1 Square Meter
Transportation:Ocean,Air
Port:QINGDAO,TIANJIN,SHANGHAI
Product Attributes

Model No.HSS

BrandXunda

CertificationISO9001

ColorBlack

Heat ResistanceHigh Temperature

WaterproofWaterproof

ApplicationCeramic

AdhesiveOther

Base MaterialOther

TypePressure-Sensitive Tape

Water Vapor Transmission Rate<0.3 G/㎡/24h

Dielectric Strength35 KV

Water Absorptivity0.05%

Tensile Strength20MPa(2900 Psi)

ELONGATION550%

Peel Strength To Primed Steel85N/cm

Cathodic Disbondment10mm Radius

Volume Resistivity>1.0 X 1016 Ohm.com

Softening Point85℃

Shrink Force240KPA(35 Psi)

Packaging & Delivery
Selling Units : Square Meter
Package Type : Export Paper Carton Box
Download :
Product Description



System  Description


The pipeline PE Film Heat Shinkable Sleeve is a radiation cross linked sleeve designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations. 


When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.


The Epoxy Primer should applied to the prepared pipe surface then heat shrink sleeve is immediately wrapped around the joint over the wet epoxy primer.


Product  Composition


The pipeline PE Film Heat Shinkable Sleeve consists of three layers, primer layer, adhesive layer, film backing.

Primer: Liquid epoxy,  solvent free two component.

Adhesive: High shear strength copolymer adhesive

Film backing: Radiation cross linked. High density polyethylene 


Product  Features


Excellent resistance to cathodic disbondment.

Long term corrosion protection.

Non hardening and non cracking.

Mechanical protection and moisture resistance. 

Excellent chemical resistance

Excellent resistance to shear forces

Fast application and high performance.


Product  Properties


Backing

Property

Typical Value

Test Method

Tensile Strength

20MPa(2900 psi)

ASTM D-638

Elongation at Break

550%

ASTM D-638

Specific Gravity

0.95

ASTM D-792

Hardness, Shore D

48

ASTM D-2240

Dielectric Strength

20 kv/mm

ASTM D-149

Water Absorption

0.05%

ASTM D-570

Shrink Force

240KPA(35 psi)

ASTM D-638

Volume Resistivity

1.0 x 1016 ohm.cm

ASTM D-257

Adhesive

Property

Typical Value

Test Method

Softening Point

85℃

ASTM E-28

Lap Shear

40 psi

ASTM D-1002

Heat Shrinkable Sleeve

Property

Typical Value

Test Method

Peel to Steel

35N/cm

ASTM D-4541

Low Temperature Flexibility

-20℃

ASTM D-2671

Cathodic Disbondment

10mm radius

ASTM G8,30days,@23℃

Impact Resistance

Pass

DIN EN 12068

Indentation Resistance

Pass

DIN EN 12068

Dielectric Breakdown

35kv

ASTM D-149


Ordering Information


Xunda pipeline heat shrink sleeves are available in pieces.


Product Type

Standard Ordering Options

Sleeve Thickness

2.0mm.2.5mm or others

Sleeve Width

450mm.600mm.900mm or others

Sleeve Length

Φ273mm.Φ510mm.Φ711mm or others


Xunda Tape 1Xunda Tape 11Xunda Tape 10Xunda Tape 9Xunda Tape 2Xunda Tape 3Xunda Tape 4Xunda Tape 5Xunda Tape 7Xunda Tape 8


Home> Products> Heat Shrinkable Pipe Coating> Heat Shrinkable Sleeve> PE Film Heat Shinkable Sleeve For Steel Pipe
  • Send Inquiry

Copyright © 2024 Jining xunda pipe coating materials co., ltd. All rights reserved. Privacy Policy

Send Inquiry
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send