Corrosion Prevention Heat Shrinkable Sleeve For Pipeline
$1≥1Ton
Payment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF |
Min. Order: | 1 Ton |
Transportation: | Ocean,Air |
Port: | QINGDAO,TIANJIN,SHANGHAI |
Jining xunda pipe coating materials co., ltd.
Business Type:Distributor/Wholesaler , Manufacturer
Main Markets: Africa , Americas , Asia , Caribbean , East Europe , Europe , Middle East , North Europe , Oceania , Other Markets , West Europe , Worldwide
Exporter:51% - 60%
Certs:ISO14001, ISO9001, OHSAS18001, MSDS, TUV
Description:Heat Shinking Sleeve For Pipe,Hot Shinkable Sleeve,Corrosion Heat Shrinkable Sleeve For Pipeline
$1≥1Ton
Payment Type: | L/C,T/T |
Incoterm: | FOB,CFR,CIF |
Min. Order: | 1 Ton |
Transportation: | Ocean,Air |
Port: | QINGDAO,TIANJIN,SHANGHAI |
Model No.: HSS
Brand: Xunda
Certification: ISO9001
Color: Black
Heat Resistance: High Temperature
Waterproof: Waterproof
Application: Ceramic
Adhesive: Other
Base Material: Other
Type: Pressure-Sensitive Tape
Water Vapor Transmission Rate: <0.3 G/㎡/24h
Dielectric Strength: 35 KV
Water Absorptivity: 0.05%
Tensile Strength: 20MPa(2900 Psi)
ELONGATION: 550%
Peel Strength To Primed Steel: 85N/cm
Cathodic Disbondment: 10mm Radius
Volume Resistivity: >1.0 X 1016 Ohm.com
Softening Point: 85℃
Shrink Force: 240KPA(35 Psi)
System Description
The pipeline Hot Shinkable Sleeve is a radiation cross linked sleeve designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations.
When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.
The Epoxy Primer should applied to the prepared pipe surface then heat shrink sleeve is immediately wrapped around the joint over the wet epoxy primer.
Product Composition
The pipeline Hot Shinkable Sleeve consists of three layers, primer layer, adhesive layer, film backing.
Primer: Liquid epoxy, solvent free two component.
Adhesive: High shear strength copolymer adhesive
Film backing: Radiation cross linked. High density polyethylene
Product Features
Excellent resistance to cathodic disbondment.
Long term corrosion protection.
Non hardening and non cracking.
Mechanical protection and moisture resistance.
Excellent chemical resistance
Excellent resistance to shear forces
Fast application and high performance.
Product Properties
Backing | ||
Property | Typical Value | Test Method |
Tensile Strength | 20MPa(2900 psi) | ASTM D-638 |
Elongation at Break | 550% | ASTM D-638 |
Specific Gravity | 0.95 | ASTM D-792 |
Hardness, Shore D | 48 | ASTM D-2240 |
Dielectric Strength | 20 kv/mm | ASTM D-149 |
Water Absorption | 0.05% | ASTM D-570 |
Shrink Force | 240KPA(35 psi) | ASTM D-638 |
Volume Resistivity | 1.0 x 1016 ohm.cm | ASTM D-257 |
Adhesive | ||
Property | Typical Value | Test Method |
Softening Point | 85℃ | ASTM E-28 |
Lap Shear | 40 psi | ASTM D-1002 |
Property | Typical Value | Test Method |
Peel to Steel | 35N/cm | ASTM D-4541 |
Low Temperature Flexibility | -20℃ | ASTM D-2671 |
Cathodic Disbondment | 10mm radius | ASTM G8,30days,@23℃ |
Impact Resistance | Pass | DIN EN 12068 |
Indentation Resistance | Pass | DIN EN 12068 |
Dielectric Breakdown | 35kv | ASTM D-149 |
Ordering Information
Xunda pipeline heat shrink sleeves are available in pieces.
Product Type | Standard Ordering Options |
Sleeve Thickness | 2.0mm.2.5mm or others |
Sleeve Width | 450mm.600mm.900mm or others |
Sleeve Length | Φ273mm.Φ510mm.Φ711mm or others |
Copyright © 2024 Jining xunda pipe coating materials co., ltd. All rights reserved. Privacy Policy
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.